Press the "Configure" button and set up the gamepad. To turn off Dolphin's in-built support, go into the "Controller Settings" and uncheck "Direct Connect". (12-13-2014, 09:32 PM)skid Wrote: If you have the vJoy drivers installed, the GC pad will act like a generic gamepad which can be configured in Dolphin like any other controller. In Windows, Driver signing enforcement might need to be disabled. The WUP-028 (057E 0337) GC adapter has to be accessible by libusb for Dolphin to make use of it. The steps for driver installation can now be followed.
Then unplug and re-insert the GC adapter. Select "Delete the driver software for this device". If the controller settings says "Driver not detected", go to the Windows "Device Manager", and look for the "WUP-028" device which is usually under the "Universal Serial Bus devices".
Dolphin will detect GC adapters that are plugged into USB hubs. If Dolphin's controller setting says that the adapter is not detected, try inserting the GC adapter into another USB port (try USB 2.0 ports and USB 3.0 ports). The ports on the adapter correspond to the numbered ports in the "Controller Settings." Ensure that "Standard Controller" or bongos is selected in the "Controller settings". If a pad is unplugged from the adapter, Dolphin will use what is configured (PC keyboard/mouse, PC gamepad etc). Dolphin supports hot-plug, so the pads can be unplugged and plugged into other ports. Both USB cables might need to be plugged in for wireless controllers and/or rumble. The GC pad is auto-configured and calibrated (and cannot be changed). Press "OK" on the "Controller settings" and start a game. If it does, select "Standard Controller" (or TaruKonga/bongos) in the ports that you have a GC pad plugged into.ġ5. In the "Controller settings", under "GameCube Adapter", it should have the option of "Direct Connect" checked. Select "Yes" to modify the system driverġ3.
If it is, on the right hand side, select "WinUSB"ĩ. If it doesn't, follow the driver removal instructions below.ħ. Check that the driver on the left says "HidUsb" and the USB ID is "057E 0337". In the pulldown menu, select "WUP-028".Ħ. From the "Options" menu in Zadig, select "List All Devices"ĥ. If you would like to use Dolphin's in-built driver, uninstall the vJoy drivers and unplug the GC adapter.Ĥ. If you have the vJoy drivers installed, the GC pad will act like a generic gamepad which can be configured in Dolphin like any other controller.
0 kommentar(er)
